华为无线实验:利用AC管理AP,并且无线用户能够上网

网络技术联盟站

发布于 2023-03-13 21:29:58

1.1K0

发布于 2023-03-13 21:29:58

文章被收录于专栏：网络技术联盟站网络技术联盟站

1实验需求

利用AC管理AP,并且无线用户能够上网

2实验拓扑

3实验配置

路由器配置

[AR1]int g0/0/1
[AR1-GigabitEthernet0/0/1]ip add 192.168.10.1 24

[AR1]int loo 0
[AR1-LoopBack0]ip add 1.1.1.1 24                                      ===设置个回环口当做外网   

[AR1]ip route-static 192.168.0.0 255.255.0.0 192.168.10.2              ===指向内网网段

POE的配置

vlan 9          创建vlan9

interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 2 to 4094

interface GigabitEthernet0/0/2
 port link-type trunk
 port trunk pvid vlan 9
 port trunk allow-pass vlan 2 to 4094

interface GigabitEthernet0/0/3
 port link-type trunk
 port trunk pvid vlan 9
 port trunk allow-pass vlan 2 to 4094

核心

interface Vlanif1
 ip address 192.168.10.2 255.255.255.0         ===与路由器相连的地址

interface Vlanif9
 ip address 192.168.9.253 255.255.255.0       ===与AC相连的地址

interface GigabitEthernet0/0/2
 port link-type trunk
 port trunk allow-pass vlan 2 to 4094

interface GigabitEthernet0/0/3
 port link-type trunk
 port trunk allow-pass vlan 2 to 4094

ip route-static 0.0.0.0 0.0.0.0 192.168.10.1                            ====静态路由指向路由器

ip route-static 192.168.8.0 255.255.255.0 192.168.9.254      ====指向AC

AC配置

sys
sys AC
vlan batch 8 9
dhcp enable
int vlan 8                        
ip add 192.168.8.254 24
dhcp select interface
dncp ser dns 114.114.114.114                        
int vlan 9                    
ip add 192.168.9.254 24
dhcp select interface                        

int g0/0/1
port link-type trunk
port trunk allow-pass vlan all

[AC]capwap source interface vlan 9                        ===重要    

[AC]ip route-static 0.0.0.0 0 192.168.9.253             ===AC指向核心,使得业务vlan能够出去  

[AC]wlan
[AC-wlan-view]ap auth-mode no-auth                      ==不用认证    

[AC-wlan-view]dis ap all                                       ==查看AP是否上线“nor”

0    00e0-fcd5-07f0 00e0-fcd5-07f0 default 192.168.9.193 AP2050DN        nor   0 21S
1    00e0-fc04-1400 00e0-fc04-1400 default 192.168.9.121 AP3030DN        nor   0 3S


[AC-wlan-view]security-profile name wlan-security1        ==创建名为“wlan-security”的安全模板
[AC-wlan-sec-prof-wlan-security]security wpa2 psk pass-phrase 12345678 aes  ==配置WPA2+PSK+AES的安全策略密码为：12345678

[AC-wlan-view]ssid-profile name wlan-ssid1                     ==创建名为“wlan-ssid”的SSID模板
[AC-wlan-ssid-prof-wlan-ssid]ssid within                           ==设置SSID名称为“within”（WiFi的名称）

[AC-wlan-view]vap-profile name wlan-vap1                       ==创建名为“wlan-vap”的VAP模板
[AC-wlan-vap-prof-wlan-vap]forward-mode tunnel             ==配置转发模式为“tunnel”
[AC-wlan-vap-prof-wlan-vap]service-vlan vlan-id 8            ==配置业务数据转发模式、业务VLAN
[AC-wlan-vap-prof-wlan-vap]security-profile wlan-security1        ==引用安全模板
[AC-wlan-vap-prof-wlan-vap]ssid-profile wlan-ssid1            ==引用SSID模板


[AC-wlan-view]ap-group name default
[AC-wlan-ap-group-ap-group1]vap-profile wlan-vap1 wlan 1 radio all  == 配置AP组引用VAP模板 AP上射频0使用VAP模板“wlan-vap”的配置

当执行完"vap-profile wlan-vap1 wlan 1 radio all"命令后,WiFi信号就出来了