750mA Linear Charger with Power Path Management
750mA Linear Charger with Power Path Management
一、General Description
YHM2711 is a highly integrated, single-cell Li-ion battery charger with system power path management for space-limited portable applications. The full charger function features Trickle-charge, constant current fast charge and constant voltage regulation, charge termination, and auto recharge.
YHM2711 can deliver up to 500mA charging current, be programmed externally with a single resistor. The charge voltage is 4.2V. YHM2711 automatically terminates the charge cycle when the charge current drops to 1/20 of the programmed value after the final float voltage is reached. The device can report charging/discharging current for fuel gauging by current monitor output.
二、Pin Configurations
三、Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Disclaimer: YHMICROS reserves the right to make any change in circuit design, specification or other related things if needed without notice at any time.
四、Package Dimensions
